PRODUCT BENEFITS

Tempered tool for better wear resistance.

Hollow Compositube handle in fibreglass reinforced polyamide:
- Hollow handle: Lighter.
- Fibreglass reinforced polyamide core: Greater resistance.
- Handle texture comparable to wood: Pleasant to the touch.
- Rot-proof: Does not degrade with time.

SAFETY ADVICE

Replace tine protector after use.

CARE ADVICE

The working end of a garden tool becomes worn and suffers from reduced performance over time. Sharpening tool points is easy and can be done using an ordinary file.

Go to Mantenance

ADVICE FOR FITTING A COMPOSITUBE REPLACEMENT HANDLE

Fitting:
- You can fit a tool blade onto a Compositube handle with a screw through the hole in the blade provided for the purpose. Drilling a hole does not weaken the handle.
- Place the end of the handle in the blade socket.
- Make sure that the handle is properly seated in the socket.
- Hold the tool vertically, blade side up, and tap the other end firmly on the ground. Repeat this action until the blade is fully bedded on to the handle.
- Check that the end of the handle is sufficiently far into the socket, so that the nail hole is over the handle.
- Drill a 2.5mm hole, 20mm deep through the hole in the tool blade.
- Insert a 4 x 16mm or 4 x 20mm screw fully into the handle.

Warning:
Do not fit the blade with a nail. You risk breaking the handle.